The gear ratio of spiral bevel gear should be measured in this way.
* source: * author: admin * issuing time: 2024/11/14 14:58:07 * browse: 15
In the field of mechanical engineering, the speed ratio of two or more spiral bevel gears can be directly measured, as follows:
1. The gear ratio usually results from the intermeshing of two gears. One gear may be connected to the motor shaft and the other to the load shaft. It may also be a gear in the process of transmitting power from the driving gear to the driven gear. We call this gear an idler gear.
2. The number of teeth of the gear may then be counted. The specific thing to do is to determine the number of teeth on the drive gear.
3. The number of teeth of the gear is then calculated.
1. The gear ratio usually results from the intermeshing of two gears. One gear may be connected to the motor shaft and the other to the load shaft. It may also be a gear in the process of transmitting power from the driving gear to the driven gear. We call this gear an idler gear.
2. The number of teeth of the gear may then be counted. The specific thing to do is to determine the number of teeth on the drive gear.
3. The number of teeth of the gear is then calculated.
4. In addition, calculate the number of teeth of a gear. We know that the transmission ratio of each spiral bevel gear depends on its number of teeth, so that some relatively simple calculations can be made.
previous item: What are the characteristics of spiral bevel gear?
next item: Milling method for machining spiral bevel gears
关闭返回